Article Content
Why Does Electrical Wiring Need to Be Replaced?
Electrical wiring is one of the most critical infrastructure elements of any building. Ageing or faulty wiring does not just cause inconvenience — it is a serious fire and electrocution hazard. A significant proportion of Antalya's buildings were constructed 20–30 years ago, and their electrical systems simply cannot meet today's demands.
Signs that your wiring needs replacing:
- Frequent circuit breaker trips or RCD activation
- Burn marks, discolouration or heat from sockets and switches
- Light bulbs burning out unusually quickly
- Too few sockets, heavy reliance on extension leads
- No earthing system
- Wiring older than 25 years
What Modern Electrical Infrastructure Requires
Today's lifestyle demands far more from electrical systems than in the past:
- Smart home systems — Automation, sensors and smart switches all need additional cable infrastructure
- Electric vehicle charging — High-amperage sockets in the garage or car park
- Home office — Multiple sockets and USB charging stations in work spaces
- Kitchen appliances — Ovens, dishwashers and built-in appliances each need a dedicated circuit
- Air conditioning — A separate circuit for each room
The Rewiring Process
A professional electrical rewiring project involves the following stages:
- Survey and planning — Assessment of the existing installation, new layout design
- Chasing — Cutting cable channels into walls and ceilings
- Cable installation — NYM or NYY standard cables, colour-coded throughout
- Distribution board — New consumer unit with RCDs and MCBs
- Earthing — All sockets and metal surfaces properly earthed
- Socket and switch fitting — Planned positions, then fitted
- Testing and commissioning — Load test on every circuit
- Making good — Channels filled and plastered over
Key Safety Requirements
For a high-quality, safe electrical installation:
- Cable quality — TSE-certified, fire-resistant cable is essential
- Circuit separation — Kitchen appliances, air conditioning, lighting and sockets must be on separate circuits
- RCD protection — Mandatory for personal safety; 30 mA sensitivity
- Earthing — All metal surfaces and sockets must be earthed
- Cable cross-section — Correct size for each circuit to prevent overheating
- Cable conduits — Cables must be protected against mechanical damage
Lighting Systems
A rewiring project is also the ideal moment to upgrade your lighting:
- Switch to LED — 70–80% energy saving over incandescent or fluorescent systems
- Dimmer circuits — Dimmable lighting for ambience control
- Motion sensors — Automatic lighting in corridors, bathrooms and storage areas
- Smart lighting — Control by phone or voice command
Legal Requirements and Documentation
Electrical rewiring work in Turkey is subject to specific regulations. Work carried out by a licensed electrician can be accompanied by an electrical installation certificate, which may be required for insurance and property transactions.
We work alongside licensed and experienced electricians throughout Antalya. Contact us for a free site visit.
